2014, 2015 Audi A4, A5, A6 Turbo Adds Horsepower & Torque from K&N Air Intake System
- 24 Nov 2015
Refined performance is the trademark of German performance luxury sedans. With technologically-advanced engines, drivetrains and interiors, the driving experience is captivating on so many levels. 2014 and 2015 Audi A4, A5 and A6 2.0 liter turbo models deliver exceptionally in this arena and at a price point that doesn't break the bank nor ding the credit card at the fuel pump. Where else can you get 220 break horsepower, fuel economy figures near 30 miles-per-gallon and all of the modern interior accoutrements at a price point lower than BMW and Mercedes? The turbocharged 4-cylinder engines in these Audis are especially peppy, though there's always room for improvement. Help your Audi breathe easier and develop more power with a performance boost from K&N Typhoon performance air intake system, number 69-9508T.
The K&N Audi 2014-2015 A4, A5, or A6 2.0L turbo air intake is a bolt-on performance upgrade, guaranteed to increase horsepower for the Audi models listed below. K&N has been building performance parts for vehicles since 1969 and the refined performance of the 69-9508T Audi air intake showcases that legacy. At the core of the K&N Audi 2014-2015 A4, A5, or A6 2.0L turbo air intake is a K&N RU-3570 conical air filter, constructed with K&N's famous oiled-cotton gauze filter media. Its design provides a large surface area to help increase airflow and provide long service intervals. The oiled-cotton gauze flows better than paper, allowing your engine to breathe easier, and still provides excellent engine protection. The filter is washable and reusable and can go up to 100,000 miles (~160,000 km) between cleanings, depending on driving conditions.
Shrouding the K&N performance air filter is a heat shield to protect air entering the engine from radiant heat under the hood, as well as a replacement fresh air duct to funnel cooler air from outside the vehicle through the filter and into the turbocharger. The air filter is attached to the factory mass airflow sensor, which is then attached to a replacement turbo-inlet hose. All required factory connections are maintained with the K&N 69-9508T Typhoon Audi 2014-2015 A4, A5, or A6 2.0L turbo air intake system.
The turbocharged 4-cylinder engines in these Audi models react especially well to the K&N 69-9508T air intake system when it comes to performance gains. On the dyno, a 2014 Audi A5 2.0 liter turbo equipped with the K&N Audi 2014-2015 A4, A5, or A6 2.0L turbo air intake produced an estimated additional 15.4 horsepower at 3600 rpm and 17.7 pound feet of torque at 3000 rpm to the wheels. Check out the dyno chart to see the performance increase over stock.
The 69-9508T is an easy-to-install performance upgrade and K&N covers it with a 10-year/million mile limited warranty and Consumer Protection Pledge. A refined performance automobile should only be entrusted to upgrades that have an equally refined performance pedigree. Give your Audi a boost in horsepower and torque with the K&N 69-9508T Typhoon performance air intake system. Owners of the following Audi models can enjoy increased horsepower and torque by installing the K&N 69-9508T Typhoon air intake system: 2015 Audi A6 2.0L Use the K&N Dealer Search to find an authorized K&N retailer or installer in almost any part of the world. For all K&N Audi A4, A5, or A6 air intakes visit the Air Intakes for Audi A4, Air Intakes for Audi A5 or Air Intakes for Audi A6 page on KNFilters.com. |
|||||
 |
|||||
|
|||||
|
