Ford Fusion and Mercury Milan K&N Replacement Air Filter Released
- 14 Sept 2006
The Mercury Milan is the corporate twin to Ford's Fusion and shares
architecture, drive train configuration and safety technology. Both ride on a
stretched widened version of the highly acclaimed Mazda 6 platform, providing
good handling from the four-wheel independent suspension and rack and pinion
system.
K&N Engineering has designed a filter (33-2357) to fit in the factory air box of the 2006 to 2009 Mercury Milan and Ford Fusion with a 2.3L engine, 2010 to 2011 Mercury Milan with a 2.5L engine, and 2010 to 2012 Ford Fusion 2.5L engine models. The drop-in design means adding performance is easy. Simply remove the disposable air filter in the Milan or Fusion and replace it with the K&N Air Filter.
Replacement Air Filter for Mercury Milan and Ford Fusion
Unlike disposable filters, K&N Air Filters use a unique pleated design
consisting of an oiled cotton fabric between two layers of epoxy-coated aluminum
screen. The filters capture airborne dirt particles and allow high volume air
flow. These particles then cling to the outside of the filter and become part of
the filtering media.
The washable, reusable, high flow flat panel filter is designed to increase horsepower and acceleration, while providing excellent filtration. The (33-2357) is 1.063 inches in height (27mm) with an outside length of 10.438 inches (265mm) and an outside width of 6.25 inches (159mm).
K&N invented the concept of washable, reusable filters more than 35 years ago. Unlike disposable filters, K&N Air Filters use a unique pleated design comprised of an oiled cotton fabric sandwiched between two layers of epoxy-coated aluminum screen. The filters capture airborne dirt particles while allowing high volume air flow. These particles then cling to the outside of the filter and become part of the filtering media.
K&N's stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be the last air filter your vehicle will ever need.
Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.
K&N Engineering has designed a filter (33-2357) to fit in the factory air box of the 2006 to 2009 Mercury Milan and Ford Fusion with a 2.3L engine, 2010 to 2011 Mercury Milan with a 2.5L engine, and 2010 to 2012 Ford Fusion 2.5L engine models. The drop-in design means adding performance is easy. Simply remove the disposable air filter in the Milan or Fusion and replace it with the K&N Air Filter.
Replacement Air Filter for Mercury Milan and Ford Fusion
The washable, reusable, high flow flat panel filter is designed to increase horsepower and acceleration, while providing excellent filtration. The (33-2357) is 1.063 inches in height (27mm) with an outside length of 10.438 inches (265mm) and an outside width of 6.25 inches (159mm).
K&N invented the concept of washable, reusable filters more than 35 years ago. Unlike disposable filters, K&N Air Filters use a unique pleated design comprised of an oiled cotton fabric sandwiched between two layers of epoxy-coated aluminum screen. The filters capture airborne dirt particles while allowing high volume air flow. These particles then cling to the outside of the filter and become part of the filtering media.
K&N's stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be the last air filter your vehicle will ever need.
Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.
