Latest News

Dave Gotts' Eye-Popping Cobalt Blue 1932 Ford Pickup Roadster Driver

Dave Goll purchased the '32 Ford pickup roadster from its original owner

In the possession of Dave Gotts, this striking 1932 Ford roadster pickup never fails to stop traffic

When you race an 8.0 second Camaro, going fast on the street isn’t all that much of a necessity, according to Dave Gotts, owner of both the aforementioned K&N-supported Camaro as well as the head-turning 1932 Ford Pickup roadster custom that draws crowds wherever it’s parked.

The Ford was built around a very specific concept. It wasn’t to be a full-on restoration or a rat rod or even a modern roadster. Instead the decision was made to recreate an era when hot rodding was high in America’s consciousness.

In the early- to mid-1960s hot rods appeared on album covers, on television shows, and in movies. Car customizers like George Barris and Dean Jefferies became household names when creations like the Monkeemobile and Batmobile hit the small screen. Likewise, NHRA drag racing became popular with television networks in that it took only a few cameras to broadcast a race (versus Indianapolis or a road course), making it very cost-effective. And viewers loved it.

K&N filters provide both protection for the engine as well as increase power and response

The carb setup is very much to the period, with three single barrel carbs each with a K&N filter

So this 1932 Ford pickup was built very much in the spirit of what a young enthusiast might construct at the time. There are a few concessions to modern technology that we’ll get to later, but for the time being we’ll focus on the similarities to an early 1960s build.

First and most obvious is the removal of the roof, creating what Ford never offered in the 1930s – a roadster pickup. While sunshine in your face and wind in your hair is a side benefit, builders chopped off the roofs of hot rods to get rid of weight and improve performance.

The truck was built by master fabricator Jimmy Riordan at Wellbilt Kustoms in Buena Park, California. Every effort was made to give the truck an early '60s hot rod feel: fabricated headers that terminate in a megaphone (no bundle of snake here), a three carburetor set-up featuring three K&N filters, steel wheels with the original bolt pattern, and reproduction whitewalls with the scalloped sidewalls that were so common in that era.

The 1932 Ford Pickup roadster was built by Wellbilt Kustoms in Buena Park, CA

Wellbilt Kustoms did an excellent job maintaining the theme of a late 1950s/early 1960s roadster

While the engine may appear to be a vintage small block Chevrolet, it’s actually a modern crate motor. Besides the carb set-up and the exhaust, replacing the stamped rectangular valve covers of the 350 with finned cast aluminum versions that make it appear like an earlier small block. And while the use of the 350 small block may appear to many to be ubiquitous, there’s good reason for it. Of all the small block configurations, it has the fewest number of compromises (or most advantages, depending how you look at it). That’s why the 350 has been available since 1967.

The transmission is another nod to modern practicality. Rather than dealing with upgrading a vintage box, the build team chose a General Motors TH350 three-speed automatic. Introduced in 1969, and like the engine, it’s newer than the target time period. However, given its key advantages of strength, size, weight (just 120 lbs.), and cost, it was an easy decision, though.

At the back is a major component that is consistent with the era the builder sought to replicate – a Ford nine-inch rear end. The nine-inch Ford rear end, with its front access to the ring and pinion, was introduced in the 1957 Ford F-100 and F-150 and the Ford Fairlane. The following year it would be fitted to the Ford Thunderbird. And like the Chevrolet 350, which is also no longer installed in new vehicles, reproduction units remain available in the aftermarket.

The sound of the megaphone headers call attention to the pickup roadster from blocks away

The brutish headers hark back to a time when science didn't drive product design

Controlling the nine-inch Ford rearend is a three-link suspension system, which keeps the power on the ground. Front suspension is by the original transverse leaf springs. Another concession, this time to safety, is the addition of a four wheel disk brake system.

And then there’s the paint. The truck is painted in a shade of cobalt blue that would make the ocean envious. And it never fails to stop viewers in their tracks whether it's parked at the drag strip or the local drive-in restaurant

Despite the glorious paint, it’s no trailer queen. Dave drives it on a regular basis to shows and races and just for fun. Look carefully and you’ll see stone chips in the paint that serve as witness to his frequent use of the rod.

For example, he and his wife drove the ’32 Ford to the Rockabilly Extravaganza Car Show and Music Festival in Riverside, California, recently. While they intended simply to park and walk around, they were directed instead into the car show display area. In a testament to how unique and magnetic the cobalt-blue ’32 Ford pickup is, Dave Gotts was presented with the car club’s choice award at the event.

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

K&N Air Intake Adds Power to Your GM EcoTec3 V8 Powered Pickup Truck or SUV

K&N 57-3082 for 2015 Cadillac Escalade, '14–'15 Chevy Silverado, Suburban & Ta

The large seven-inch filter protects your engine while providing a large volume of air to draw from

The L83 and L86 GM small blocks, referred to in marketing materials as part of the EcoTec3 truck engine family, are some of the most advanced gasoline-powered engines to be made available in a full-sized pickup truck or SUV. The EcoTec3 engine family features three state-of-the-art technologies to make the most of power, torque, and efficiency across a broad range of operating conditions: direct fuel injection, cylinder deactivation, and continuously variable valve timing.

The EcoTec3 lineup consists of the three different power plants: a 5.3L V8 L83 and a 6.2L V8 L86, plus a V6 engine, all mated to six-speed transmissions when sold in the US and Canada. The 5.3L V-8 is rated at 355 horsepower and 383 lb-ft of torque, while the 6.2L V8 is rated at 420 horsepower and 450 lb-ft of torque. These motors are fitted to the 2015 Cadillac Escalade, 2014 – 2015 Chevrolet Silverado, Suburban, and Tahoe, and 2014 – 2015 GMC Sierra and Yukon 5.3L and 6.2L V8 models.

While you may be thinking that technologies like direct injection and continuous variable valve timing just improve fuel economy or may have some limited impact on performance, in fact they open the door for an improved power-making air intake system like the K&N 57-3082.

The K&N 57-3082 is designed to provide an increased flow of cooler air from outside the vehicle for your L83 and L86 motors to draw from. With more incoming air available, the ECU adds more fuel to match, and the engine produces more horsepower and torque.

And these aren’t empty claims. K&N has evaluated the performance of stock vehicles to those equipped with the 57-3082 air intake system, and these are the results: 2014 Silverado 1500 5.3L, an estimated increase of 10.68 horsepower, on a 2015 Tahoe 5.3L, an estimated increase of 15.39 horsepower, and on a 2014 Silverado 1500 6.2L, an estimated increase of 13.78 horsepower. And these are tested on a chassis dyno at the rear wheel, which reads lower than an engine tested out of the vehicle.

The K&N 57-3082 is a simple and straightforward installation that adds more power

Shielded from hot engine air, the air intake system can draw clean, fresh air for more power

No need to move or remove any other components other than the stock intake, as the K&N air intake system 57-3082 retains the original location of the air filter. The heat shield mounts in the factory air box location, but provides the filter far greater access to incoming cold air. The air filter utilizes K&N’s oiled cotton media in a seven-inch conical housing with a chrome cap and an ultra-strong molded pliable rubber flange which absorb vibration and allows for secure attachment at the bottom. The intake tube has mounting points for the factory mass air sensor and crank case vent hoses.

K&N air intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. Your engine can now draw a larger amount of air than the restrictive OEM filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range.

Installation of the K&N 57-3082 is simple, with easy-to-follow instructions available both on the website and packed with the kit. You need only basic hand tools and about 90 minutes of your time to increase the power and responsiveness of your L83 or L86 engine.

The only maintenance is a service you can do yourself in no time at all. At intervals of 100,000 miles (depending upon your driving conditions) by using the 99-5000 K&N air filter cleaner, you can easily clean and recharge your air filter, preparing it for 100,000 more miles of driving. Your one K&N air filter is designed to last for the lifetime of your vehicle, which K&N guarantees will perform for up to 10 years or 1,000,000 miles without requiring replacement. For full details visit the K&N Million Mile Limited Warranty.

The K&N 57-3082 is designed to fit the following vehicles:

2015 GMC YUKON XL 5.3L V8 Fuel Injection - All Models
2015 GMC YUKON DENALI XL 6.2L V8 Fuel Injection - All Models
2015 GMC YUKON DENALI 6.2L V8 Fuel Injection - All Models
2015 GMC YUKON 5.3L V8 Fuel Injection - All Models
2015 CHEVROLET TAHOE 5.3L V8 Fuel Injection - All Models
2015 CHEVROLET SUBURBAN 5.3L V8 Fuel Injection - All Models
2015 CADILLAC ESCALADE ESV 6.2L V8 Fuel Injection - All Models
2015 CADILLAC ESCALADE 6.2L V8 Fuel Injection - All Models
2014 GMC SIERRA 1500 6.2L V8 Fuel Injection - All Models
2014 GMC SIERRA 1500 5.3L V8 Fuel Injection - All Models
2014 CHEVROLET SILVERADO 1500 6.2L V8 Fuel Injection - All Models
2014 CHEVROLET SILVERADO 1500 5.3L V8 Fuel Injection - All Models

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

The K&N CM-8016 Air Filter Keeps the Can-Am Defender UTV Running Clean and Strong

CM-8016 filter for the Can-Am Defender

Multiple layers of oiled cotton gauze provide excellent filtration

Can-Am’s Rotax V-twin engine is a proven performer in the motorsports industry. The engine is reliable and adapts well to various applications and duties. In the Can-Am Defender all-wheel-drive UTV, the engine powers a capable work, hunting, and play vehicle. As good as it is, the multi-talented Defender series will benefit significantly from the carefully-engineered K&N CM-8016 air filter.

First off, the Defender’s off-road duty demands a filter that is up to the grimy tasks to which the UTV will be subjected. K&N’s engineers have built extra protection into all of our filters that are intended for dirt duty. The multiple layers of woven cotton gauze media in the CM-8016 offer excellent filtration even in the roughest of conditions. The pleated, oiled media provides a large filtration area that provides high dirt holding capacity and long service intervals. K&N’s rigorous testing protocols verify an overall filtration efficiency of nearly 99%.

CM-8016 filter for the Can-Am Defender

The specially designed sealing bead ensures a secure fit

In addition to excellent filtration, the CM-8016 offers an increase in airflow that is designed to boost the performance of the Rotax power-plant. An increase in horsepower and more lively acceleration are the usual byproducts of an increase in available air to the engine.

Off-road duty can render a conventional paper filter element useless after just a day of hard riding. The CM-8016’s reusable design means that a cleaning and re-oiling is all that is needed to get the UTV back on the hunt or back to work. The wasteful and expensive cycle of buying and disposing of conventional air filters ends with the CM-8016. The K&N 99-5000 filter care kit is all that is needed for quick and convenient filter service.

CM-8016 fiter and box for the Can-Am Defender

The CM-8016 for the Can-Am Defender is ready to use out of the box

All of these benefits come in a unit that is a direct replacement for the stock filter. It fits securely in the factory air box and requires no fuel management modifications. The filter’s sealing bead ensures a tight fit that prevents unfiltered air from making its way to the intake. The CM-8016 comes pre-oiled and ready to install out of the box and comes with a one year limited warranty. For all of your filtration needs, consult K&N’s easy to use online application search tool.

The K&N CM-8016 is designed to fit the following vehicles:

2017 CAN-AM DEFENDER XT HD8 800 - All Models
2017 CAN-AM DEFENDER XT HD100 976 - All Models
2017 CAN-AM DEFENDER XT HD10 976 - All Models
2017 CAN-AM DEFENDER XT CAB HD10 976 - All Models
2017 CAN-AM DEFENDER MAX HD8 XT 800 - All Models
2017 CAN-AM DEFENDER MAX HD8 DPS 800 - All Models
2017 CAN-AM DEFENDER MAX HD10 XT 976 - All Models
2017 CAN-AM DEFENDER MAX HD10 DPS 976 - All Models
2017 CAN-AM DEFENDER HD8 800 - All Models
2017 CAN-AM DEFENDER HD10 MOSSY OAK HUNTING ED. 976 - All Models
2017 CAN-AM DEFENDER HD10 976 - All Models
2017 CAN-AM DEFENDER DPS HD8 800 - All Models
2017 CAN-AM DEFENDER DPS HD10 976 - All Models
2016 CAN-AM DEFENDER XT HD8 800 - All Models
2016 CAN-AM DEFENDER XT HD10 976 - All Models
2016 CAN-AM DEFENDER XT CAB HD10 976 - All Models
2016 CAN-AM DEFENDER HD8 800 - All Models
2016 CAN-AM DEFENDER HD10 976 - All Models
2016 CAN-AM DEFENDER DPS HD8 800 - All Models
2016 CAN-AM DEFENDER DPS HD10 976 - All Models

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

Filter Out All the Tire Smoke Inside Your 5th Gen Camaro with a K&N Cabin Filter

The K&N VF3017 Cabin Air Filter is designed to fit all models of the 2010-2015 Chevy Camaro

The K&N VF3017 cabin air filter is designed to fit all models of the 2010-2015 Chevy Camaro

In the car world, the Mustang vs Camaro feud could rival the Hatfields and McCoys. Thousands of tires have been killed since this feud started back in 1967. Yet each camp remains convinced that their pony car will be triumphant once the light turns green. From an objective standpoint, the sales figures clearly show that Old Man Henry's Mustang was only outsold by the Bow-Tie Boys 7 times (1977-1978, 1982-1985, 1991) prior to the introduction of the fifth generation Camaro in 2010. This reimagined Mustang fighter was based on the GM Zeta platform that had been developed in Australia by the Holden division. Thanks to the Aussie's engineering prowess, the 2010-2015 Chevy Camaro got a 4-wheel independent suspension to make it go around curves (a trick the 5th-Gen Mustang never mastered), and the engine got mounted slightly behind the front axle for better weight distribution. Then they gave the Camaro SS big Brembo brakes, the Camaro ZL1 got active shock absorbers, and the track-ready Camaro Z/28 was fitted with 15-in carbon ceramic brakes and a track-focused traction management software. This new Camaro restored honor to the Chevrolet clan in 2010, 2011, and 2013, by outselling the Mustang for the first time in many years. So now that you know your Chevy is superior to Ford's old mule, it's time to get rid of that burnt rubber smell inside your 2010-2015 Chevrolet Camaro, with a K&N VF3017 cabin air filter.

Kill odors and reduce allergy symptoms with a K&N VF3017 cabin air filter

Kill odors and reduce allergy symptoms with a K&N VF3017 cabin air filter

Believe it or not, most people don't even know if their car has a cabin air filter for the HVAC system. Most modern cars however, do have one. Yours is located under a black plastic cover in the engine compartment, just below the windshield on the passenger side. Every 2010-2015 Chevy Camaro is fitted with a filtered climate control system, which is designed to remove odors and allergens before they reach the inside of the car. It does this by forcing the heated/cooled air through a thick paper air filter, just before it gets blown through the vents. All of the dust, pollen, allergens and contaminants then collect on the surface of the cabin filter, where they remain until you change the filter, or they get sucked around the filter and into the cabin. As these contaminants build up, the HVAC system will have to work harder to get air through that dirty cabin air filter. The air will also become contaminated by all the dirt flying around inside the housing, which will result in weird smells, musty/stale air, and increased allergy symptoms.

To clean the air inside of your 2010-2015 Camaro RS, Camaro SS, Camaro ZL1 or Camaro Z/28, you're going to need a K&N VF3017 cabin air filter. Instead of paper, each K&N cabin filter is made from a special synthetic material that's designed to filter out dirt, dust, pollen, mold, mildew, fungus, germs, spores, bacteria, and many other irritants. Even microscopic particles will get trapped deep inside the web of synthetic fibers, then the filter's electrostatic charge will lock them inside the material, instead of on the surface. Then every 12-months/12,000 miles (depending on driving conditions), all you have to do is remove the K&N cabin filter from its housing, and clean it using the 99-6000K&N cabin air filter refresh kit.

The reusable K&N VF3017 cabin air filter will keep you from spending money on a new OE cabin filter every year, and it's backed by a 10-Year/Million Mile Limited Warranty too. But more importantly, a K&N cabin filter will provide a drastic improvement to the air that you breathe every day. And if you have allergies, you'll definitely appreciate the superior filtration during pollen season. So stop suffering like a Mustang owner and pick up a K&N cabin air filter today!

The VF3017 fits the following vehicles:

2015 CHEVROLET CAMARO ZL1 6.2L V8 Fuel Injection - All Models
2015 CHEVROLET CAMARO SS 6.2L V8 Fuel Injection - All Models
2015 CHEVROLET CAMARO 7.0L V8 Fuel Injection - All Models
2015 CHEVROLET CAMARO 3.6L V6 Fuel Injection - All Models
2014 CHEVROLET CAMARO ZL1 6.2L V8 Fuel Injection - All Models
2014 CHEVROLET CAMARO SS 6.2L V8 Fuel Injection - All Models
2014 CHEVROLET CAMARO 7.0L V8 Fuel Injection - All Models
2014 CHEVROLET CAMARO 3.6L V6 Fuel Injection - All Models
2013 CHEVROLET CAMARO ZL1 6.2L V8 Fuel Injection - All Models
2013 CHEVROLET CAMARO SS 6.2L V8 Fuel Injection - All Models
2013 CHEVROLET CAMARO 3.6L V6 Fuel Injection - All Models
2012 CHEVROLET CAMARO ZL1 6.2L V8 Fuel Injection - All Models
2012 CHEVROLET CAMARO SS 6.2L V8 Fuel Injection - All Models
2012 CHEVROLET CAMARO 3.6L V6 Fuel Injection - All Models
2011 CHEVROLET CAMARO SS 6.2L V8 Fuel Injection - All Models
2011 CHEVROLET CAMARO 3.6L V6 Fuel Injection - All Models
2010 CHEVROLET CAMARO SS 6.2L V8 Fuel Injection - All Models
2010 CHEVROLET CAMARO 3.6L V6 Fuel Injection - All Models

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

Fallen Hero Harley® Pays Powerful Homage to True American Heroes at 2016 SEMA Show

Fallen Hero custom Harley at the SEMA show

The artwork on Fallen Hero is powerful and detailed

“Marines will low crawl through a thousand miles of barbed wire and broken glass to help a brother Marine or a member of his family – even when they have never met.”

Corporal Jason Dunham was the first US Marine since Vietnam to receive the Medal of Honor. While serving with the 3rd Battalion, 7th Marines during the Iraq War, Dunham deliberately covered an enemy grenade with his helmet and body to protect nearby Marines. The hero died of the injuries suffered in that selfless act just days later.

Fittingly, Dunham has been honored in a spectrum of ways since his heroic act. A US Post Office carries his name as do a number of military facilities. In 2009, the US Navy launched the USS Jason Dunham. The destroyer was commissioned in 2010.

Trunk art on Fallen Hero custom Harley at the SEMA show

The custom's artwork pays tribute to the owner's brothers in arms

While poignant, you may wonder how this story fits with motorcycling and K&N. That’s where owner Josh Davis comes into the picture. Davis, a Marine himself wanted to do something special with his 2009 Harley® Street Glide. After he was rear ended on the bike, Davis figured it was the perfect time to rebuild the Glide just the way he wanted it - in honor of Dunham and others who have made the ultimate sacrifice.

He took the bike to Nathan and Tony Curry of Curry’s Inc in Nixa, Missouri. At Curry’s, the rebuild included the company’s highly stylized bagger rear end that became the canvas for the artwork that Davis envisioned. That vision was to create a rolling and rumbling tribute to the Marines we've lost and those with whom he served. The end result of the “Fallen Hero” custom Harley is amazing and powerful.

K&N filter on Fallen Hero custom Harley at the SEMA show

An American-made K&N filter protects Fallen Hero's engine

In addition to the artwork honoring Jason Dunham, Fallen Hero memorializes other brave Marines including those very close to Davis. “The artwork honors the guys I served with in Iraq in 2003 and 2004,” said Davis. “On the bags, it has the names of other guys that were lost overseas including my dad and my grandpa.”

Nathan Curry said that he originally wanted to do the complete bike in black and white. However, Davis’ desire to have multiple portraits on the Harley changed that plan. The bike's bodywork became a striking background for that artwork. While the murals are primarily done in black and grey, Curry said there needed to be a something more.

Eagle artwork on Fallen Hero custom Harley at the SEMA show

The eagle, colored in the flag motif, is a focal point of the build

“I came up with the idea of adding a little color to it,” Curry said. “We decided to focus on the flags. So we did the (color) focus on the Medal of Honor and the flags.”

Davis left one very special mural up to Curry’s creative vision. “In the back, he gave me free rein," Curry said. "He just wanted a kneeling soldier with a gun and the boots. I surprised him with the eagle – I turned it into a flag so I could add a bunch of color onto the back. He was just ecstatic.”

Jason Dunham's uniform on display on the USS Jason Dunham

Jason Dunham's uniform on display on the USS Jason Dunham

The build includes a full sound system in the custom fairing. Tasteful billet bits grace the engine and chassis, and the custom floorboards are a striking addition. The intricate silver and black accented wheels complete the Fallen Hero's low and long look.

K&N is proud to be a part of such a powerful and important tribute bike. It is fitting that an American-made K&N filter protects the Fallen Hero custom. It is not lost on us that our freedoms were won on battlefields by the heroes that this custom honors.

About the quote in the lead of this article – that is the message on the side-panel of Fallen Hero. Clearly those are not just idle words.

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N