Latest News

K&N Driver Cody Swanson Honors 2 Legends with His USAC Midget Win at Santa Maria

Cody Swanson clinched victory on September 17th at the Santa Maria Raceway

Cody Swanson clinched victory on September 17th at the Santa Maria Raceway

On September 17th of this year, driver Cody Swanson clinched victory at the USAC Western States Midget race, held at the Santa Maria Raceway, in Nipomo California. In lap 25, he passed the number 11 car driven by Corey Elliott, then went on to clinch victory in the 30-lap main event. Swanson had led for 20 laps at last year's Santa Maria race, but a breakdown ultimately cost him the checkered flag.

"The Santa Maria win was huge for Cody Swanson. It was the second USAC win of his career and after a few nights of bad luck and mechanical issues, he earned the victory. His first USAC victory was at Bakersfield on 3/30/13" said Lance Jennings, an official with USAC. It was indeed an important victory, because as of this writing, Swanson now sits in 6th place in the USAC Western States Midget point standings.

It takes a crew of family and friends to prep and maintain Cody's #71S Spike/Van Dyne racer

It takes a crew of family and friends to prep and maintain Cody's #71S Spike/Van Dyne racer

Racing has always been in Cody Swanson's blood, His grandfather Chuck raced a Model A Ford on the dirt tracks of Minnesota in the 1960's, and his father Kirk (who also happens to be a Technical Development Supervisor at K&N) has been involved in off-road and dirt bike racing for many years. Naturally, Cody started racing go-carts at the age of 7, and was eventually crowned California State Champion in 2006. A year later, he was the INEX Legends Rookie of the Year, he took the VRA Midget Championship in 2012, and currently holds the track records at the Irwindale Speedway and the Las Vegas Motor Speedway Bullring. So far this year, he's had 4 Top 5 and 7 Top 10 finishes in the USAC Western States Midget Series.

With his car dialed in, Swanson was able to snatch a victory from the track that had beat him a year

With his car dialed in, Swanson was able to win at the track that had beat him a year prior

A big part of his success this year has been due to his #71S midget car. It takes a crew of family and friends to prep and maintain Cody's Spike/Van Dyne racer, and anything that reduces the maintenance time, can also help reduce lap times. That's why Swanson Motorsports uses K&N filters like the 81-1005 stainless inline fuel filter, the HP-3002 heavy duty wrench-off oil filter, and the 100-8576 carbon fiber air box. These are designed specifically for racing and heavy duty applications, so they can be quickly cleaned and re-installed by Cody's volunteer pit crew.

So far this year, Swanson has 4 Top-5 and 7 Top-10 finishes in the USAC Western States Midget Series

So far this year, Swanson has 4 Top 5 and 7 Top 10 finishes in the USAC Western States Midget Series

With his car dialed in, Swanson was able to snatch a victory from the track that had beat him a year before. But the Santa Maria win was important for another reason. You see, 2016 was a tough year for both Cody's family, and the USAC family. Earlier in the year, Cody's father in-law Kelvin Campbell lost his battle with cancer, leaving a hole in the Swanson team. USAC driver Brian Clausen also lost his life in a tragic accident at the Belleville Nationals, leaving a hole in the tight-knit racing community. These two men had a major impact on a lot of people, which is why Cody dedicated his hard fought victory to both of them.

This 26-year-old driver has a big heart, and an incredible amount of talent behind the wheel. We at K&N are proud to sponsor Swanson Motorsports, and look forward to watching Cody Swanson compete November 24th (Thanksgiving night) at the USAC National Midget Series Turkey Night Grand Prix. This thrilling 98-lap race will be held at the Ventura Speedway in Ventura California, so get your tickets before they sell out.

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

Kawasaki Z750, Z800, and Z1000 Get Airflow Boost from K&N KA-1003 Air Filter

K&N KA-1003 Air Filter

The KA-1003 air filter is a direct replacement for the restrictive stock air filter

Naked is good. Get your mind out of the gutter – I am referring to naked (un-faired) motorcycles. The Kawasaki Z-series is a great naked bike in all of its variations, which have been produced from 2003-2016. Whether you ride the 750, the 800, or the big 1000, your street-fighter will benefit from the installation of the K&N KA-1003 replacement air filter.

The filter is designed to increase airflow to Kawasaki’s inline four cylinder engine. This decrease in intake restriction allows the Z-series to breathe more freely. The likely result is a noticeable boost in the bike's performance. Every K&N filter is designed to increase horsepower and torque with the most notable byproduct being livelier throttle response. The performance benefits of the K&N air filter will be even more pronounced if you have installed an aftermarket exhaust or slip-on muffler.

K&N KA-1003 Air Filter Box

The K&N KA-1003 Air Filter is pre-oiled and ready to use out of the box

In addition to an increase in airflow, the K&N KA-1003 offers a double handful of other benefits that make riding even more fun and convenient. The filter’s pleated cotton gauze media provides a large filtration area that extends service intervals. When it is time to clean the unit, the process is simple and quick using the K&N 99-5000 service kit that includes all that is needed to clean and re-oil the filter. This reusability means that the KA-1003 is the last filter you’ll need to buy for your Kawasaki. It puts an end to the costly and wasteful cycle of buying and disposing of paper filters.

Finally, the KA-1003 offers excellent filtration to protect the Z-series engine. The oiled, cotton gauze material is an ultra-effective air cleaning system. The KA-1003’s base seal and sealing bead are carefully engineered to prevent unfiltered air from making its way around the filter element. All of this adds up to an easy-to-install, drop in filter that does everything well. Out of the box, the filter is pre-oiled and ready to install in the factory Kawasaki air box.

The filter is made in the USA and is backed by K&N’s industry-leading 10-year/Million-Mile Limited Warranty. The KA-1003 is for you if your bike is on the application list below. For all of your air filter, oil filter, and intake needs, consult K&N’s easy-to-navigate online search tool.



The K&N KA-1003 air filter fits the following bikes:

2016 KAWASAKI Z800 806 - All Models
2015 KAWASAKI Z800 806 - All Models
2014 KAWASAKI Z800 806 - All Models
2013 KAWASAKI Z800 806 - All Models
2012 KAWASAKI Z750R 750 - All Models
2012 KAWASAKI Z750 750 - All Models
2011 KAWASAKI Z750R 750 - All Models
2011 KAWASAKI Z750 750 - All Models
2010 KAWASAKI Z750 750 - All Models
2009 KAWASAKI Z750 750 - All Models
2009 KAWASAKI Z1000 1000 - All Models
2008 KAWASAKI Z750 750 - All Models
2008 KAWASAKI Z1000 1000 - All Models
2007 KAWASAKI Z750S 750 - All Models
2007 KAWASAKI Z750 750 - All Models
2007 KAWASAKI Z1000 1000 - All Models
2006 KAWASAKI Z750S 750 - All Models
2006 KAWASAKI Z750 750 - All Models
2006 KAWASAKI Z1000 1000 - All Models
2005 KAWASAKI Z750S 750 - All Models
2005 KAWASAKI Z750 750 - All Models
2005 KAWASAKI Z1000 1000 - All Models
2004 KAWASAKI Z750 750 - All Models
2004 KAWASAKI Z1000 1000 - All Models
2003 KAWASAKI Z1000 1000 - All Models

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

2016 Toyota Tacoma Air Intake Designed to Boost Horsepower and Throttle Response

The K&N 71-9039 permits the engine to grab more air than the factory intake permitted.

The K&N 71-9039 air intake is designed to replace the restrictive factory air filter and intake.

First unveiled in 1995, the Toyota Tacoma is a compact pickup truck that is fundamentally a Toyota Hilux that has been modified and renamed for the North American market.

Three engines were available to power the vehicle. A 2.4-liter four-cylinder engine that delivers 142-horsepower and 160 lb-ft (217 N-m) of torque, a 2.7-liter four-cylinder engine that produces 150-horsepower and 177 lb-ft (240 N-m) of torque, and a 3.4-liter six-cylinder engine that generates 190-horsepower and 220-lb-ft of torque

Available as a four-wheel or two-wheel drive vehicle, it is designed to take on a 4-speed automatic and 5-speed manual transmission and comes in two cab configurations: Regular Cab and Xtracab.

The Tacoma is now in its third generation. The 2016 model comes with a choice of either a crew cab or extended cab as well as a choice of four-wheel or two-wheel drive. Off-road enthusiasts would be glad to see that the TRD off-road model with automatic transmission is being offered this year. Engine choices include a 2.7-liter four-cylinder and a 3.5-liter V-6. A new 6-speed transmission is available to go with either engine. Four-wheel drive models can come with a manual gearbox as well.

K&N offers the K&N 71-9039 Blackhawk Induction air intake system for the 2016 Toyota Tacoma. The intake system is designed to improve horsepower, throttle response, and engine sound. Estimated horsepower gain is 15.57 at 5446 rpm.

The K&N 71-9039 air intake system for the 2016 Toyota Tacoma.

The K&N 71-9039 air intake system includes a K&N RU-3102HBK washable and reusable air filter

Power is improved due to a free-flowing mandrel-bent aluminum tube that accommodates the factory mass air sensor and crankcase vent hose and round tapered universal rubber air filter with a Dryflow oil-free synthetic media. The filter can be washed after up to 100,000 miles of driving, depending on driving conditions. K&N offers an air filter cleaning kit that is specially formulated to cleanse the filter when needed.

The cold air intake system is designed to replace the restrictive factory air filter and air intake housing on the 2016 Toyota Tacoma. The low restrictive air intake permits the engine to grab a larger amount of air than the stock air intake permitted.

The tube is black powder-coated and includes a welded, engraved K&N plate for a clean, high performance appearance. It also features a heat shield that blocks hot engine air from entering the intake assuring that cool air gets into the engine.

The air intake system can be installed in about 90 minutes using common household hand tools. It is designed and engineered to allow you to use the existing factory mounting points.

The K&N 71-9039 air intake system is designed to fit the following vehicle applications:

2017 TOYOTA TACOMA 3.5L V6 Fuel Injection - All Models
2016 TOYOTA TACOMA 3.5L V6 Fuel Injection - All Models

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

Colton Haaker Earns the 2016 EnduroCross Crown While Cody Webb Wins in the Finale

Colton Haaker at California EnduroCross

Colton Haaker celebrates his championship with the number 1 plate (Photo: Adam Booth)

As the dust settled in Ontario, California, Cody Webb had won the battle, but Colton Haaker won the season-long war. The sport’s two top stars made 2016 a campaign to remember with a back-and-forth battle, but Haaker’s cushion was enough that he sealed the deal with his second place finish in the final round.

In reality, Haaker only needed to finish seventh or better to capture the #1 plate. But clearly, he is not the kind of guy to play it safe. “Really, nobody would expect me to come out here and charge with so much on the line, but I’m always trying to push myself and I did that tonight,” Haaker said. “It’s what pushes me and it worked out for the championship even though going hard had me crash a few more times than I wanted.” 2016 will sit as a benchmark for the new series champion. This is the first AMA title for Haaker, who had an impressive season with five wins and three second place finishes.

Cody Webb racing in California EnduroCross

Cody Webb takes the win in the final EnduroCross race (Photo: Adam Booth)

Webb had another stellar round in Ontario with a heat win, a win in the Hot Lap competition, and the main event win. However, the season lead that Haaker had amassed proved too great in the end. Webb’s disappointment was evident after the race, but he showed class and respect for his series rival. “A few little things went wrong this year and I let the championship slip away,” Webb said. “Colton was so solid and I couldn’t chip away at his points lead this year. I’m really happy I got a convincing win tonight and look forward to carrying the momentum into next season.”

The battle for third added some drama to the final race weekend. In the end, Cory Graffunder edged out a pair of 'Tys for the final podium spot. Ty Cullins finished in fourth and Ty Tremaine in fifth in the season finale. “The race was pretty exciting tonight because somehow I got a good start from the back row and came out fifth by turn two,” Graffunder said. “And after that I had a good battle with Tremaine back-and-forth a few times.” Graffunder’s podium is especially impressive considering he had just arrived back in the US after competing in the grueling Baja 1000.

Cory Graffunder racing in California EnduroCross

Cory Graffunder races his way to the podium (Photo: Adam Booth)

On the season, Tremaine edged out Mike Brown to finish third in the 2016 standings. Proving that every point counts, Tremaine's heat race win gave him the single point that was the separation he needed to step up on the season podium.

The competitive rivalry between Haaker and Webb, as well as the sport’s hungry up-and-comers bodes well for an exciting 2017 season. K&N is proud of all the racers in the series and we look forward to a continued partnership with the series.


2016 Ontario EnduroCross Main Event Results

1. Cody Webb, KTM

2. Colton Haaker, Husqvarna

3. Cory Graffunder, KTM

4. Ty Cullins, Beta

5. Ty Tremaine, KTM

6. Noah Kepple, KTM

7. Geoff Aaron, GasGas

8. Kyle Redmond, Beta

9. Nick Thompson, KTM

10. Mike Brown, Husqvarna

11. Max Gerston, Beta

12. Trystan Hart, Husqvarna

13. Eric Rhoten, Yamaha


2016 EnduroCross Final Point Standings

201 - Colton Haaker, Husqvarna

192 - Cody Webb, KTM

127 - Ty Tremaine, KTM

126 - Mike Brown, Husqvarna

116 - Kyle Redmond, Beta

111 - Cory Graffunder, KTM

104 - Max Gerston, Beta

100 - Noah Kepple, KTM

97 - Trystan Hart, Husqvarna

90 - Geoff Aaron, GasGas

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

K&N-Sponsored Rider and Driver Sara Price Presented Prestigious Rising Star Award

Price on motocross bike

K&N-sponsored Sara has been a trailblazer and top competitor in motocross

The 2016 Off-Road Motorsports Hall of Fame Ceremony was a big night for K&N-sponsored racer Sara Price. The ceremony, which was held at the South Point Resort in Las Vegas, is primarily a source of recognition for individuals who have amassed a lifetime of accomplishments and contributions in the sport of off-road motorsports and racing.

However, the event also takes time to identify and award the sport’s up-and-comers. Sara Price was awarded the Rising Star award in the category of Motorcycle/ATV/UTV. Price was truly surprised by the award as the winners are not announced until the ceremony. The recognition is a huge honor since it is voted by members the Off-Road Motorsports Hall of Fame.

Price and Super Truck

Price is making waves in the Super Truck world

Price's career is on an incredible ascent in the off-road racing world. She got her start racing motocross and became the first ever factory supported female racer under Monster Energy Kawasaki. Price became a multiple-time national champion in motocross and a repeat X-game medalist. She has been a trailblazer for women in off-road racing.

The talented racer doesn’t want to be defined just by gender, despite the fact that she has the looks and poise to have been a finalist in beauty contests. “Growing up I always raced against the boys in motocross,” says Price, “I get a lot of respect; the guys know I’m there to compete. That’s what I want to be known for, my talent, skill and the hard work I put in — not because I’m the only girl.”

Price signing autographs

As a true cross-discipline racer, Price has a boatload of talent

2016 has been a banner year for Price. She has expanded her competitive horizons into the Super Truck racing world. Here is another venue in which she has proven to be a trailblazer. The 24-year-old was selected to race in Australia’s Gold Coast 600 and was the only female on the starting grid. Price again showed her toughness after being involved in a violent crash in qualifying then hitting the wall hard in the first race. She was ready to race in the next event, but officials determined after the post race inspection that her truck's fuel cell had enough damage to it where it was not safe to compete in the race. Despite the frustration of being sidelined in the GC 600, Price’s future is bright in Super Truck racing. Look for big things from her in 2017.

Sara Price is truly a Renaissance woman. She’s a motocross and Supercross racing standout, a UTV Champion, an X-Games medalist, a Super Truck driver, a beauty contestant, and stunt woman. K&N is proud of Sarah and excited to continue to support and sponsor her in her pursuit of motorsports world domination!

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N