The store will not work correctly when cookies are disabled.
We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The 63-1141 intake reduces airflow restriction with its smooth intake tube bends
In their test and review, Four Wheeler Network called the Can-Am Maverick X3 Turbo, “…a four-wheel-drive off-road machine that will never disappoint in bringing an immediate smile to the driver.” K&N can add even more smiles to that great side-by-side with the power-packed K&N 63-1141 AirCharger intake.
No one does powersports intakes like K&N. Our engineers are the industry leaders in developing intakes that provide the ultimate in power-boosting airflow to UTVs. Importantly, K&N provides this power while still delivering top-notch engine protection.
The 63-1141 AirCharger replaces the restrictive stock unit with an intake that is designed to straighten and smooth the airflow to the fuel injection system. Of course, it also uses legendary K&N filter technology that has proven to be the ultimate free-flowing air cleaner system for over four decades.
The air box on the 63-1141 intake is fully sealed to eliminate heat and dirt
K&N’s in-house testing showed an estimated increase of over 7 horsepower when the 63-1141 was installed in an otherwise stock 2017 Can-Am Maverick X3 Turbo. It is also important to note that the K&N dynamometer chart shows a horsepower increase across the speed spectrum for the ultimate in usable power. Simply put, K&N guarantees you will get more power from your X3 Turbo with the 63-1141 – period.
The impressive power that the 63-1141 AirCharger can provide does not come at the expense of engine protection. The K&N intake for the Maverick X3 Turbo is built with free-flowing aluminum intake tubes and a fully sealed air box design. That design separates the air filter from the heat and dirt that will rob power and reduce engine life.
The K&N oil-impregnated, cotton gauze filter element is specifically designed to stand up to the extreme duty for which the Can-Am Maverick X3 Turbo is designed. Off-road racers and enthusiasts have trusted K&N filters for decades, and the 63-1141 includes the full evolution of that technology. There are also optional pre-filters available for the intake. The 25-5167 extreme duty pre-cleaner wrap or RU-5064DK Drycharger can be used for even more protection.
The intake comes ready to install out of the box.
Installation of the 63-1141 AirCharger is a straightforward process that can usually be finished in about an hour and a half. Periodic cleaning of the filter unit is made easy with a recharge kit like the 99-5050.
From the tall front wheel to the sweeping bags, 'The Mistress' is an eye-catcher
Each staging of the Progressive International Motorcycle Show (IMS) features an impressive slate of awards given out at the J&P Ultimate Builder Custom Bike Show. K&N sponsors three of the most exciting categories – Modified Harley, Modified Retro, and the K&N Performer award.
A seductive Harley Bagger aptly named ‘The Mistress’ rolled away with the K&N Performer Award at the second stop of the IMS in New York, New York. The custom Fatboy was built by Cycles at 117, a full-service shop based in Keyport, New Jersey, for owner Brian Perhacs. As the winner of the K&N prize, Perhacs walked away with a trophy, and also $750 worth of the finest intake and filtration products in the world.
The Harley bagger is tall in the front and low in the back
Now let’s take a look at that salacious bagger. The Mistress is crafted around a fully built 107-inch S&S engine. Of course, there is a K&N filter in that S&S intake. The V-twin is blacked out except for polished cooling fin ends on the big jugs. The exhaust is equally positioned on the dark side with its matte black finish and subtly artful header bends.
Up front, Cycles at 117 made room for a massive 26-inch wheel that features the same black motif as the engine with polished aluminum detailing. The custom front fender is finished on the bottom like a Roman soldier’s helmet. Impressively high ape-hanger handlebars rise above a cool, sculpted headlight feature that holds much of the instrumentation.
Out back, a Bad Dad Competition bagger rear end adds dramatic length to the already massive build. On top of the sculpted rear fender is a compact passenger seat. The driver pillion is set extra low, making for a dramatic reach up to the towering grips.
The blacked out S&S V-twin is the centerpiece of the K&N Award winner
That leads us to that stunning paint. Rick’s Superpaint applied a coating that is truly deep and eye-catching. The fenders, tank, bags, headlight shroud, and other bits and pieces are detailed in a combination of flames and geometric shapes that are featured in various shades of blue, accented with black. That variety of images and colors, while seemingly disparate, works together perfectly.
So, so far, that makes a naked Harley Shovel at the Long Beach IMS and a massive bagger in New York that have walked away with the K&N Performer award. Stay tuned to see what customs garner the K&N spotlight and the next stops of the Progressive International Motorcycle Show.
Classic lines and cafe racer modifications define this labor of love
No matter what you call them - community motorcycle shops, DIY facilities, or moto co-ops – they represent an exciting trend in the motorcycling community. The Moto Collective of Minneapolis, Minnesota, focused a bright spotlight on the movement with a big win at the Minneapolis stop of the Progressive International Motorcycle Show (IMS).
‘Sage,’ a classic cool 1972 Honda CL350 custom, built by Chris Rotondo and Breanne Allen of the Moto Collective, rolled away with the K&N Performer Award at the Minneapolis J&P Ultimate Builder Custom Bike Show. K&N sponsors the category, and two other classes, at each stop of the IMS. As you will see, the CL350 custom has a special significance to the builders.
The custom headers and silencers complete the Honda build
“It completely embodies my love for the outdoors and the adventures it will take me on,” said Allen of the CL350. “After restoration, I was proposed to by my partner of five years.”
That partner of five years happens to be Chris Rotondo, the other creative force behind Sage. Yes, the two are partners in moto craftsmanship and in life.
The CL350 clearly retains its classic Honda looks. However, many of the parts are custom made. The familiar early-70s tank wears a great two-tone paint job and custom Honda badges. That tank is followed by a custom seat that has an earth tones motif. There is even a short, wooden rear fender to keep the organic theme flowing.
Earth tones and a Southwestern look were integrated into the custom seat
The 350cc parallel twin engine breathes through a pair of carbs wearing screened velocity stacks. We know that when Allen starts her adventures, those stacks will be replaced with high flow K&N pods. The frame triangle behind the intake is uncluttered and open.
One of the most intriguing parts of the build is the custom exhaust. The twin headers are heat-wrapped for an old-school performance look. The silencing duties are handled by ultra-cool copper-hued twin canisters.
Sage rolls on adventure bike rubber spooned onto black anodized, spoked rims. The forks and rear springs are conventional and period-correct.
The shift linkage that leads to the extreme rear-set pegs are pure café racer. Up front, the café style is completed with low clip-on bars and minimalist lighting and instrumentation.
K&N congratulates Chris Rotondo and Breanne Allen on a fantastic build and their approaching marriage.
The Mod Retro Class winning 'Boston Brawler' embodies what a bobber should be
Scott Porges crafted one of the cleanest and meanest bobbers you will see. His bad “Boston Brawler” bobber (how’s that for alliteration?) takes retro cool to a whole new level. Porges' custom walked away with the Modified Harley Class of the J&P Ultimate Builder Custom Bike Show in New York. The J&P show is a highlight of each stop of the Progressive International Motorcycle Show (IMS).
Clearly, Porges, who owns American Motorcycle Service of Framingham, Massachusetts, keeps one boot planted in the past and the other firmly dug into the present. “With over 35 years in the industry, I specialize in creating custom built motors and trannys,” Porges says. “I balance between old ‘hot rod’ tricks and the ingenuity of today’s technology.”
Scottie Porges' bobber emerged from the darkness snatch the Modified Retro Class of the NY IMS
Porges’ 1968 Harley-Davidson Panhead custom may just prove once and for all that less really is more. The artfully crafted hardtail frame and clean springer forks cut a stance that is all bobber. Massive rubber is spooned on the black, spoked front and rear wheels. In true bobber style, the front wheel is devoid of a fender and the rear is appropriately minimalist.
It should be noted that this is not some pampered show bike and it's not for the faint of heart.
"This is a foot clutch, hand shift bike with no front brake and not for the novice rider," warned Porges. "That being said, I ride the berrys outta this bike and have been for 6 or 7 years. We call it the Boston Brawler because it gets ridden hard in Boston."
K&N is a sponsor of three of the biggest categories in the J&P competition
Flat drag handlebars sit just in front of a small teardrop tank that rocks a sinister red and black color scheme. An ultra-thin custom seat rides on a nicely crafted seat spring.
That wonderfully sparse frame and bodywork leaves nothing to the imagination with that beautiful Panhead V-twin. The intake is completely exposed and the carburetor butterfly is clearly visible. We certainly hope Porges will fit a K&N for street duty. The exhaust exits through shorty straight-through pipes that certainly announce the Boston Brawler’s presence.
"The engine and trans are from a '68 FLH," Porges said. "We stroked the motor to 88 inchs and installed Andrews close ratio gears in the box. We run an S&S E carb with a thunder jet and the exhaust is fabed in house."
In the end, Porges got just what he wanted from the Boston Brawler build.
"I like my bikes low and tight with an attitude, and this has an early drag bike look to it and a healthy motor to go with it."
K&N is proud to sponsor a competition that highlights classic builds like the Boston Brawler.
Long, plummeting lines give Tyler Foster's custom a one-of-a-kind silhouette
A Harley-Davidson® show-stopper won the Modified Harley class at the New York stop of the Progressive International Motorcycle Show (IMS). Tyler Foster, who specializes in custom exhaust systems with his company Sikpipes, created a bagger that turned heads all weekend long at the Big Apple IMS.
K&N sponsors the prestigious Modified Harley® Class at every stop of the IMS as part of the world’s biggest custom bike competition, the J&P Ultimate Builder Custom Bike Show. We could not be more impressed by the bikes that have rolled away with the titles, the trophies, the money, and the K&N product awards in the first two stops of the IMS.
The intake velocity stack on the Road King build is steampunk cool
Tyler Foster’s, 2001 Harley Road King was aptly named ‘Brown.’ Brown is tall yet low; complex yet simple. Sound like contradictions? Not in this case.
Up front, Brown rolls on a tall RKD Speed front wheel wearing low-profile rubber. Even with that thin rubber, that front wheel is so tall that it sits about on level with the top of the tank. The wheel is bolted to a raked out Voodoo girder front end. In typical Voodoo style, the forks are a wicked combination of clean lines and artful geometry.
Flowing back from the triple tree, the stretched, custom frame could not sit any lower. Therein rests the answer to the tall yet low riddle. The seat height rests at about mid-engine level which makes for the ultimate in ‘climbing the monkey bars’ riding position. It’s quite the reach to the Brass Balls Cycles grips and pegs.
The Voodoo girder front end and ultra tall wheel on 'Brown' are remarkable
The tank and sweeping bagger rear end feature a blinged out paint job applied by Execution Style. The paint job that looks simple at first glance becomes deeper and more complex on closer inspection.
If you look at any element of this build, you will find amazing detail; however, the total project embodies a symbiosis that gives the overall impression of simplicity. Complex yet simple.
Foster’s decision to frame the engine allows full view of the nicely accented power plant. Of course, the exhaust specialist highlighted the headers on the Road King. The simple, perfectly bent pipes exit with a wide-open mouth below each jug on the V-twin.
K&N congratulates Tyler Foster on his win in the Modified Harley Class of the J&P Ultimate Builder Custom Bike Show in New York.
