Latest News

Bo Butner Takes Lead in NHRA Pro Stock Playoffs at Maple Grove Raceway

Bo Butner took the win at Maple Grove Raceway In Pennsylvania

Bo Butner took the win at Maple Grove Raceway In Pennsylvania

Bo Butner came out of the NHRA Mello Yello Drag Racing Series event at Maple Grove Raceway, in Pennsylvania, with the lead in the Pro Stock standings. But racing against Greg Anderson in the final round was nothing compared to having the Gold Star Moms watching him drive down the drag strip.

A group of Gold Star Moms, whose children have died in combat fighting for the United States military, placed decals with the names of their children on Butner’s car. He counted them over the weekend. There were 27 decals on his car. “I needed them all,” Butner said. “It didn’t hurt.”

After the races, the Gold Star Moms joined a contingent that visited Washington, D.C. the Sunday of the races at Maple Grove Raceway. Butner said the pressure of producing for the Gold Star Moms was greater than any of the races over the weekend. “That was the most pressure,” Butner said. “I haven’t done a lot military-wise in my life. I have some military in my family. But when you actually get to meet the moms and they’re there and they’re hugging you and you’re saying, ‘Yeah, I’m going to get your kids in the winner’s circle.’”

Butner was true to his words. He won at Maple Grove. It was his fourth career win in NHRA Pro Stock, all coming in 2017. It also put him in first place in the Pro Stock standings, 41 points ahead of Anderson, after two races into the six-race Countdown to the Championship playoffs. But winning for the Gold Star Moms trumped taking the lead in the Pro Stock standings. “I am glad we can do that for them,” Butner said. “I’m sure they’re all very happy and I’m sure I will hear from each and every one of them. It’s a good cause and we’ll do something else with them I’m sure.”

Pro Stock Driver Bo Butner takes home his fourth Wally in Pro Stock at Maple Grove Racway

Pro Stock Driver Bo Butner takes home his fourth Wally in Pro Stock at Maple Grove Racway

Butner said his crew chief, Jack Line, is another reason his car ran so well at Maple Grove. Line is the son of Butner’s rival, Jason Line, in the NHRA Pro Stock division.

“He’s learning the car,” Butner said. “I’m pretty sure he knows a lot about the car. Way more than Jason. He’s been great. He’s learning. It’s great to have him.

“The KB team is strong and we showed it today and through qualifying.” Butner talked about winning the NHRA Pro Stock championship at the beginning of the season. He entered the season without a win in Pro Stock. He has four now and his team is clicking at the right time.

“It’s kind of hard for me to grasp,” Butner said. “Four more races left. We have to do our job.

“Very fortunate for those three days in a row. It’s tough. You can win from 16 here. A lot of people have done it. I didn’t do the best job driving, but I did just good enough. I’ll take that.”

The Winners Circle after the races at Maple Grove Raceway featured Butner, Force, Capps, and Krawiec

The Winners Circle after the races at Maple Grove Raceway featured Butner, Force, Capps, and Krawiec

Butner evened his head-to-head record against Anderson in final rounds at 2-2. He also closed the gap in head-to-head races. Anderson is 7-6 against Butner after the races in Maple Grove. “Greg’s tough. He doesn’t change,” Butner said. “Since day one I’ve met. He’s just an animal. This is his life. He wants to win every time. He’s taught me a lot. It’s going to be a dogfight. We’re going to try to stay ahead.”

The next NHRA Mello Yello Drag Racing Series event is at Gateway Motorsports Park in Illinois, the third race in the Countdown to the Championship playoffs.

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

A Conversation with Racer and Powersports Entrepreneur Mark Queen of Queen Racing

Queen Racing of Lake Havasu City, Arizona jumping a UTV in the dunes

Queen Racing is flying high in the performance UTV world

Mark Queen, the owner of Queen Racing in Lake Havasu City, Arizona, is emerging as one of the most progressive high-performance innovators in the powersports industry. Queen Racing specializes in water sports and UTV products, engine builds, and performance setup.

Queen’s passion for making things go faster is the fruit of his competitive nature. The durability of his products and the quality of his builds reflect rigorous testing and an amazing attention to detail. K&N sat down with Queen to find out what makes him high-performance powersports royalty.

K&N: How did you get started in racing and wrenching?

Mark Queen: I got into racing as a child. I was 8 years old when I did my first snowmobile race and that is when the addiction took over. I have been racing ever since. I started off racing sleds in the wintertime and started racing motocross in the rest of the seasons. I started doing really well in both sports, getting wins and moving up into the semi-pro races and winning there also. Things were looking great, and I was getting some good support from sponsors, but I was extremely abusive on my equipment. It seemed I could break anything out there with my riding style, so I started working on my bikes and sleds every day after school at my family's body shop.

Queen Racing of Lake Havasu City, Arizona jet ski racing

Queen Racing's Lake Havasu City home base is perfect for both desert and water racing

K&N: When did you make the move to watersports?

MQ: When I was 17, I had a severe accident. I crashed hard and broke my femur, back, and pelvis. I came out of surgery with zero feeling or movement from the waist down. It was a tough day not knowing how I would end up. Fortunately, after a few days, I started to get some feeling back and the rehab process started. One of my sponsors, Aquatrends, invited me to come and race one of their jet skis once I got back in race shape. So I took that chance and went to my first jet ski race. I got a bad start in the first moto, but came back from last all the way to second place. Now knowing how the start system worked, I was ready for moto 2. I got a 3rd place start and ended up lapping the 2nd place finisher. Needless to say, I was hooked. That year I went to the IJSBA World Finals and dominated, and again lapped 2nd place in the second moto. I left the Finals with a new factory Polaris sponsorship and new boats.

K&N: So how did that morph into your involvement in UTV realm?

Mark Queen analyzing data for engine tuning

Mark Queen's high performance tuning is driven by testing and data analysis

MQ: The (watersports) industry hit a bad point and Polaris ended up closing the water division down. I was lucky enough with their help to win multiple regional, national, and world championships on my Polaris equipment. Polaris just released the new RZR-S, and I had to have one. That brought me into the SxS industry.

K&N: What are your current racing efforts?

MQ: I took some years off from racing while starting my business and fatherhood. I am currently racing a Polaris RZR XP Turbo car in several race series. This season was a test season to try out several series to find what I want to try to compete in for a full championship series next year. If I can pull the funding and support together, I want to race the TORC series next year and win that championship.

K&N: How has your involvement in racing impacted your powersports business?

MQ: We sell parts that are race tested and win races. We specialize in working with race teams to help get their equipment up to race winning level, from the chassis setup to the engine tuning and clutching. The best part of racing myself is that I am usually testing something that if I prove it to work well, we can start to release it to customers. So when someone buys a Queen Racing product or tune, they know it works.

K&N: Tell us a bit about your relationship K&N.

Queen Racing of Lake Havasu City, Arizona racing a UTV in the desert

Queen puts his trust in K&N filter technology to protect his high performance builds

MQ: I have been using K&N products since my jet ski racing days. In my opinion, there is not a better engine filtration product out there! I see all kinds of engines come through my shop for really expensive rebuilds from using inferior products. The guys at K&N are the best part of the company. When I give them product feedback or ideas, they actually go put them into production and make a better product for the end user. That is huge in this industry.

K&N: What are your goals and aspirations going forward?

MQ: My future goals are to represent my sponsors to the best of my ability by giving them product feedback and development, and also in marketing. I fully plan to be a championship contender in either the Lucas Oil series or the TORC series next season! I also want to be able to add more championships to the Queen Racing team roster. Currently, I have built and tuned 31 world championship winning machines between jet skis and SxS.

K&N is proud to partner with an innovative powersports company like Queen Racing. We look forward to a long and mutually beneficial relationship and continuing to develop the best products for powersports community.

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

K&N Pro Series Driver Nicole Behar Focuses on Finish Line in Last Three Races of the Season

Nicole Behar, NASCAR, K&N Pro Series West, Colorado National Speedway

Nicole Behar is in ninth place in the NASCAR K&N Pro Series West standings after 11 races.

With three races remaining on the NASCAR K&N Pro Series West schedule, Nicole Behar has a simple goal: Win a race.

The next race on the K&N Pro Series West schedule is Meridian Speedway in Idaho. She finished third at Meridian last year and she said she thinks it is a track she can win at.

“We had a good run at Meridian last year,” Behar said. “Hopefully we can do that again this year and come home with a win. Every driver wants to win. I really want to. We’re just trying to go in and win one of these last three.”

Behar has put together a successful season so far. She is ninth in the K&N Pro Series West standings after 11 races. She has two top-five finishes. For a small, family-run team, there have been some high points. She started the season with five top-10 finishes in a row and her team was building confidence.

“We’ve had some really good races,” Behar said. “We have some good races coming up. But we’ve had some down races. Not necessarily the best of luck. We’ve blown a motor. Sonoma, we knew we probably weren’t going to be the best there because we didn’t have a road course car. We bought one a couple weeks beforehand and just tried to get it the best we could.”

The 19-year-old Behar started the season with a 10th-place finish in the season opener at Tucson Speedway in Arizona. She posted her first top-five finish with a fourth-place at the first race at Irwindale Speedway.

“The first couple of races we went down there with all of our cars, be as prepared as we can, put our mindset to do really good in those races,” Behar said. “Those are the ones you want to focus on to start off good.”

Nicole Behar, NASCAR, K&N Pro Series West, Colorado National Speedway

Nicole Behar has two top-five and six top-10 finishes in the NASCAR K&N Pro Series West.

The race at The Orange Show Speedway in California in May started a string of poor finishes. She was 17th at The Orange Show in a car that she said was capable of winning.

“That’s a place where you’re either going to finish or you’re going to crash,” Behar said. “I was just hanging out, letting the leaders hit on each other, bang it out. Unfortunately the cars in front of me got tangled. I was almost around it and the 19 car (Derek Kraus) clipped me in the rear and put me in the wall.

“I think we were running like fourth at the time. I think we really had a car to win. Sometimes those things happen and you have to move forward. It really sucks, but you keep going.”

She blew a motor in the race at Colorado National Speedway and finished 17th again. Her team didn’t have a road course for the race at Sonoma Raceway in California, the only road course race on the K&N Pro Series West schedule. Her team bought one a week before the Sonoma race.

She came in 27th in race at Iowa Speedway, a race that pits the teams and drivers from the K&N Pro Series West and East.

“We’ve had some really good races. But we’ve alo had a few bad ones,” Behar said. “With everyone being so close in points, when you have a bad race, you drop pretty fast. Our first goal isn’t to go in and focus on points, it’s just to do the best we can. Where you end up in points, that kind of happens. When you put your mindset to the points, you don’t do really good anyway.”

Nicole Behar, NASCAR, K&N Pro Series West, Colorado National Speedway

Nicole Behar finished in third place in the K&N Pro Series West race at Colorado National Speedway.

She might have had her best race of the season at Evergreen Speedway in Washington in August. She was third in a car that wasn’t exactly set up for the Evergreen Speedway track. She crashed her primary car in practice and had to qualify in her team’s back-up car. She said her team had about 30 minutes to prepare the car and she qualified without turning a single lap in practice in it. She qualified fifth and finished third. The car that crashed in practice is in North Carolina for repairs. She wants to have that car to race in one of the final three races of the season.

Being on a small team, Behar said she needs all the help she can get, Having K&N as a sponsor and supporter of the Pro Series West gives her the help she needs.

“They’re always willing to help you, help with filters,” Behar said. “Every little bit helps, especially with a small team it adds up. Without K&N there wouldn’t be a series. Without them, the West Series probably wouldn’t be here. Us drivers wouldn’t be able to race the tracks, race the cars that we do. That means a lot.”

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

Bradley Morris Standing on the Podium Multiple Times in His K&N Pro2 and Pro4

K&N Filters driver Bradley Morris celebrating his first win in his Pro2

K&N Filters driver Bradley Morris celebrating his first win in his Pro2

The beginning of the season was a learning curve for the new K&N Filters Pro 2 for Bradley Morris. Then halfway through his rookie season, you would think that he was a veteran in the class with the confidence he showed in the Pro 2 and also his Pro 4 truck. Bradley and the BME Motorsports team has been busy these last few months traveling between the Lucas Oil Off Road Racing Series and the TORC Series. He has raced three of the last four weekends in four different states.

Everything started after Utah in June, where Bradley got his first win in the K&N Filters Pro 2 leading every single lap of the race. This is where Bradley started feeling great behind the wheel. At this point, it seemed like everything started to click with Bradley, and the team was getting the trucks to mesh with Bradley’s driving style. He also got comfortable with throwing the Pro 4 sideways into a turn at high speeds and not hesitating, thinking he was going to roll. This did happen, however, in Crandon, Wisconsin, where he barrel-rolled five times in the turn before the finish line.

Show casing the K&N Filters Pro2 and Pro4 at the Lucas Oil Speedway in Wheatland, Missouri

Show casing the K&N Filters Pro2 and Pro4 at the Lucas Oil Speedway in Wheatland, Missouri

In Missouri, the races were held at the brand new track that was built at the Lucas Oil Speedway. It is about one and a third miles long and has just about everything you could put into a track from fast banked turns, huge jumps, tight turn sections, and fast straight-aways. The main jump on the track has the trucks jumping over 200 feet and up to 260 feet with a smooth landing. Bradley really enjoyed the track design and was very fast, he said, "The new track was designed with everything you want in a track, I was having fun jumping the back jump. I haven’t jumped that big since I broke my neck, with the landing built correctly I was able to do it with no issues or pain.”

Soaring the K&N Filters Pro4 over the mega jump in Wheatland, Missouri

Soaring the K&N Filters Pro4 over the mega jump in Wheatland, Missouri

In his Pro 4, he was very fast all weekend with him battling at the front in both rounds, where he finished on the podium in third place in Round 7. In Round 8, he would slide up the track in a very slick corner after the huge jump while battling for the lead, which had all the trucks behind him slam into his truck and disabling it, ending his race. In his Pro 2, Bradley would battle hard in the third place position where he was on the inside heading into the tight S turn, where he came in just a little too fast and the second place truck having some issues losing all speed, would cause Bradley to hit the rear bedside of the other driver causing it to roll. Bradley would get a black flag and have to go to the back of the field with only a few laps remaining. With the amount of speed that Bradley was showing, he was able to get all the way back towards the front just missing the podium in fourth place.

The team headed to Reno with only the Pro 2 and saved the Pro 4 for Crandon, but Bradley still got to drive in the Pro 4 races. Fellow racer, Rob MacCachren, would end up having a family emergency and would have to leave the races. With Rob only two points from the Championship lead, he asked Bradley if he would drive his truck and be his replacement. Bradley couldn’t believe that he was about to drive for his favorite driver who he has looked up to his entire life. The first time that Bradley would sit in the truck would be during qualifying for Saturday’s race, where only in three laps Bradley would end up in third place for the start of the race.

K&N Filters Bradley Morris fills in for Rockstar Energy Rob MacCachren in the Pro4

K&N Filters Bradley Morris fills in for Rockstar Energy Rob MacCachren in the Pro4

During the race, Bradley would get shuffled back a few spots while trying to get comfortable in the truck and also not trying to damage it. Bradley would get Rob some crucial championship points finishing in sixth place. On Sunday, Bradley was enjoying the setup of the truck and would battle hard and fast where he would finish on the podium in third place in the Rockstar Energy Pro 4. He said, “Not very often do you get to drive your favorite drivers truck. I have looked up to Rob my entire life, and to be able to drive his truck to help him get points for the championship was a big honor.” Bradley wasn’t only fast in Rob's Pro 4, he was also pushing it in his own Pro 2.

Bradley Morris captured a second place finish in his K&N Filters Pro2 in Reno

Bradley Morris captured a second place finish in his K&N Filters Pro2 in Reno

Starting on the second row on Saturday, Bradley would be up to second place after turn one, and the leader and Badley would put a gap on the rest of the trucks in a very short time but unfortunately, Bradley would end up having mechanical problems that would end his day. Just knowing how fast the truck was and what it could have been, gave Bradley more determination to go the following day. Bradley would find himself in the same situation with the leader and himself checking out on rest of the trucks. Bradley would stay right with the leader until the end of the race when he was slowed down by a driver a lap down but still trying to race the leader, giving the leader the gap they needed to keep Bradley in second place which also gave Bradley his third straight weekend with a podium in his Pro 2.

Flying by the massive crowds in Crandon Wisconsin at the Amsoil Cup

Flying by the massive crowds in Crandon Wisconsin at the Amsoil Cup

With less than a week before the next race the team left from Reno, Nevada, and drove straight to Crandon, Wisconsin. They arrived there on Wednesday and had practice on Thursday for the TORC event at the Crandon World Cup and the Amsoil Cup Race where the Pro 2s raced against the Pro 4s. Bradley would start third fastest in practice and while trying to get faster he ended up rolling five times after throwing it into a turn and it catching some traction in the soft cushion of the turn. Luckily, the team was able to get everything fixed and ready for the races. In the first race, Bradley would get pushed to the back after turn one and would make him battle the entire race, finishing sixth. In the Amsoil Cup, Bradley would battle with the top TORC drivers for fourth place of the Pro 4s. They would battle while passing all the Pro 2 trucks except two who were next. With Bradley being fourth in the Pro 4 and sixth overall, Bradley would have electrical issues ending his race as a result of the crash during practice.

Jumping the K&N Filters Pro4 in Crandon Wisconsin during the TORC Event

Jumping the K&N Filters Pro4 in Crandon Wisconsin during the TORC Event

With a one weekend break between races, this gave the team only about five days to get both trucks ready for Glen Helen after all the travel time. Glen Helen is one of Bradley’s favorite tracks, where it used to be called Morrisville back when Bradley raced Pro Lites. This is something that Bradley wanted to continue in his Pro 2 and Pro 4. Bradley was fast in both trucks during practice and qualifying. In the Pro 4, Bradley would battle hard the entire race, until the last few laps where he ended up breaking his rear shocks while in third place. Bradley had to do everything he could to stay on the podium, so he would give it everything the truck had on the straights and slow it down some in the corners. Then he would have to slow it all the way down going over the jumps. At the end of the race, he crossed the finish line in third place with fourth place right behind him.

Bradley Morris shooting flames in his K&N Filters Pro4 at Glen Helen Raceway

Bradley Morris shooting flames in his K&N Filters Pro4 at Glen Helen Raceway

With that momentum, he would jump in the Pro 2 where he was starting on the front row. Bradley would jump out to the front and take the lead where he would put a gap on the second place truck. After a caution, everyone was right back on his bumper, but he would jump ahead once again with Rob MacCachren on his tail in second place. While battling, the two of them would separate themselves from rest of the trucks. With only a few laps left and right after a caution, Bradley would over rotate just a tiny bit, where Rob was trying a new line down low and would cause him to run into Bradley taking both of them off the track. They were both able to get back going, and with their speed, both of them would get back to the podium with Bradley finishing in second.

On Sunday, it looked like the same race after the second lap, but Bradley started further back in the group of trucks but was able to work his way up to second where it was once again Bradley and Rob battling for the top spot. Three-fourths of the way through the race the two of them would jump side by side over the large table top and when Bradley landed it would snap the drive shaft ending the race for him but what an incredible race to watch up to that point.

K&N Filters Sponsored Bradley Morris leading in his Pro2 in Glen Helen

K&N Filters Sponsored Bradley Morris leading in his Pro2 in Glen Helen

Racing the way that Bradley has been doing has put him just five points from taking the lead in the Rookie of the Year points race for Pro 2. It is also giving Bradley and the team the mindset that they are going in the right direction and have the capability to be on the podium every race if not the top of the box. With only one more race weekend in the season being held at Wild Horse Pass in Chandler, Arizona, it is going to bring determination to be on the top podium. Bradley will also be chasing the Rookie of the Year title to add to his Rookie of the Year in the Pro Lite and Pro Buggy classes. So watch for the BME Motorsports K&N Filters Pro 2 and Pro 4 to be on top of the podium with a huge smile on Bradley’s face holding up his trophies and his replica RC Truck.

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

K&N-Sponsored Cal Poly Pomona Broncos Stampeded to the SAE F1 Competition

The K&N-sponsored Cal Poly Pomona team spent extensive amounts of time testing the chassis

The K&N-sponsored Cal Poly Pomona team spent extensive amounts of time testing the chassis

For twenty-one years California Polytechnic University, Pomona (CPP) has participated in the annual SAE (Society for Automotive Engineers) Formula 1 competition. This year was no different. With teams hailing all the from Boston to Chile, CPP students got the opportunity to put their skills to the test against top schools from around the globe.

CPP's team comes from a range of age groups and fields of study, ranging from 1st-year freshmen students to recent graduates, all of whom have an intimate interest in the automotive craft. While most of the team members are Mechanical Engineering majors, there are a few Business students concentrating in Computer Information Systems and Business Administration as well as Aerospace Engineering majors. These are useful skills as the competition involves more than just building the car, the project must then be “sold” to a group of judges acting as mock “investors” for the teams project, this is where the business skills come in useful, truly a multi-faceted, multi-talented team.

Reliability issues cost the team points in dynamic events and the CPP team placed 30th overall

Reliability issues cost the team points in dynamic events and the CPP team placed 30th overall

Beginning right after last year's competition in Germany, CPP's team spent the better part of the past year working on design concepts and eventual manufacture of their F1 car. The team was quick to begin but the design phase posed a particular challenge. The team was rather new, having lost 20 members the previous year. This was the first time many of the team members had worked on CPP's car as full team members. Nevertheless, they learned how to communicate with each other and cooperate on building a car together. The shared experience will, no doubt, prove pivotal as they prepare for next year's competition.

The CPP team works out the kinks in the F1 chassis before the competition

The CPP team works out the kinks in the F1 chassis before the competition

Once designs were completed and approved, the process of actually building the car began to take place. The build phase progressed very well with sponsors supplying the parts and materials required to make the ambitious design a reality. Over the course of 6 months, the car came together with 85% of the car being made in-house. While the car came along well, there were two performance issues that cropped up during testing. The issues arose in the front hub and front wing. The hubs were a quick fix and were handled immediately, the wing issue turned out to be a bit more vexing. It was dropped from the final design, with the possibility of being reexamined for a future design. It really was a chance for these budding mechanical engineers to gain practical experience in their chosen field. Utilizing programs such as Solidworks, ANSYS, Simulink, and AEM the students were able to apply the lessons they were absorbing in class to a real-life situation.

The Cal Poly Team with the team lead, Professor Stover

The Cal Poly Team with the team lead, Professor Stover

Results from the competition were good considering the relative experience of CPP's team. The team made design finals where they placed well. Reliability issues cost the team points in dynamic events. However, the team ended up in 30th place, overall. While not the result the team had been striving for, the experience was one that no team member would have wanted to miss out on or will ever forget.

The team members took many lessons away from the experience. Along with design changes, they learned to speak up when they had opinions, even if they differed from the group. Differing opinions only serve to strengthen the overall design of the project. They learned to focus more on the fundamentals – the engineer's most valuable tools. The group agreed that the experience was about the best practicum any of them could have experienced at CPP and they know that the experience will aid them in the future for years to come.

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N