Latest News

Rob Carpenter and One Wheel Revolution Gearing Up for the Summer Mayhem

Watch Rob Carpenter tearing up a winter wonderland on his One Wheel Revolution Stunster

Watch Rob Carpenter tearing up a winter wonderland on his One Wheel Revolution Stunster

The spring thaw is starting in One Wheel Revolution’s (1WR) home base of Montana. It’s possible that 1WR’s V-twin engines have added a few degrees to the state’s average daily temperature. “It is just finally warming up enough to ride on a weekly basis here in Montana," said 1WR’s founder Rob Carpenter. “After finishing these bike re-builds, I couldn’t wait to burn rubber and some clutch plates.”

One Wheel Revolution is a travelling stunt show that thrills crowds around the country with jaw-dropping, one-of-a-kind performances on Harley-Davidson® motorcycles. The Revolution’s choreographed shows are high on drama, skill, and entertainment, and the company has new and exciting elements to unveil in this new season.

One Wheel Revolution's Stuntster in a desert wheelie

The Stuntster in its natural state - on one wheel

While the new show elements are yet to be seen, the new and updated stunt bikes are ready for action. Though it may be true that the Montana thaw is on, Carpenter headed south to test the hardware.

“I packed up and headed to the desert around Las Vegas,” said Carpenter. “I met some rad people, rode in a couple new spots, a couple old ones, and scoped out some cool scenery for future shoots.”

“I tried to shoot as many still photos of the bikes in their glory and their pre-thrashed state as possible. Between the drainage, overflow, and desert area it was a nice contrast of scenery,” Carpenter said.

One Wheel Revolution's Trackster engine

Like all of the 1WR bikes, the Trackster breathes through a K&N intake

So let’s take a sneak peek at some of the new and updated V-twin hardware that audiences can expect in the 1WR shows throughout the country in 2017.

The One Wheel Revolution Stuntster has been totally rebuilt for the new slate of performances. Carpenter calls it, “A refreshed version of the Red Dragon wheelie machine.” The blacked-out engine and components alongside the deep red bodywork make for a clean, all-business stunt mount.

An all new star of 1WR shows will be the Trackster. Carpenter calls the burnt orange Harley, “Part Tracker, part off-road bike, part wheelie machine, and all Sportster!” Wearing dual exhausts, knobbies, and a huge rear sprocket, the Trackster will certainly be a hit at this season’s performances.

One Wheel Revolution's Stuntster side view

The One Wheel Revolution Stuntster in a rare moment of rest

Of course, every 1WR stunt bike is fully equipped with K&N performance and protection products.

“Thanks for sending all those parts so I could keep things on schedule,” Carpenter told K&N. “All the show machines are now in proper order and ready for a season of thrashing across the country! Now it’s time to finally get the Dyna ready for some action. The custom K&N black and gold intake for it will catch some eyes for sure!”

Take a look at the photos of the One Wheel Revolution stunt bikes and make sure to catch a show at a motorcycle event near you. We will keep you updated on the 1WR shows as their full schedule develops.

One Wheel Revolution's Trackster roosting in the desert

Carpenter shows what those knobbies are for on his K&N-equipped Trackster

One Wheel Revolution's Trackster tank

K&N has a place of honor on the Trackster's tank

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

Matt Shylan Set to Tackle Production Touring Car Series with Help From K&N Filters

Matt Shylan will unveil his K&N Filters Integra Type R at the NSW Production Touring Car Round 1

Matt Shylan will unveil his K&N Filters Integra Type R at the NSW Production Touring Car Round 1

New South Wales state racer Matt Shylan has revealed a stunning new K&N livery on his Honda Integra Type R ahead of this weekend’s opening round of the NSW Production Touring Car Championship.

Shylan enters his second season in the category and is confident of strong results in the D Class, despite predictions it will be the toughest of the field.

“D Class will be one of the biggest on the grid, and there is a lot of strong competition,” Shylan said. “There’s the likes of Jimmy Vernon, who is pretty quick and the GTI Golf of Josh Muggleton, but I’m confident we’ll be in the mix this year. We learnt a lot in our first season racing the Integra last year, and this year we’re ready to give it a red-hot crack.”

Shylan’s Integra has a strong history in Australian motor sport, originally built as a Honda factory car ahead of the Bathurst 12 Hour and was one of the cars in Conroy Motorsport’s 1-2 finish in 2009.

Production Touring Car regulations mean the Integra has to remain true to its showroom specifications, with a standard 2.0L engine, standard gearbox, limited slip differential and factory Brembo brakes.

Shylan Motorsport utilises K&N filters throughout the race car, including the HP Series oil filter and high flow air filter.

Shylan's Integra Type R is showroom stock, but features K&N air and oil filters

Shylan's Integra Type R is showroom stock, but features K&N air and oil filters

“K&N products have made maintenance simple,” Shylan said. “Being a Japanese model, the oil filter is difficult to get to, so the team loves the ability to be able to tighten and loosen it with a spanner. K&N products give us certainty we have less to do at the track, and make it an easier service in the workshop.”

Shylan carries the K&N branding on his Integra for the first time at Wakefield Park Raceway, located two hours south of Sydney.

“It’s a privilege to carry K&N on the car. It’s such an iconic brand, and one of the most recognised in automotive circles," he said. "They have the best filters in the world, and we’re looking forward to a strong season of Production Touring Car racing with their support.”

The NSW Production Touring Car Series takes place over six rounds. Here is the 2017 NSW Production Touring Car Race schedule:

Round 1: 1-2 April - Wakefield Park (3 sprint races)

Round 2: 29-30 April - Sydney Motorsport Park (3 sprint races)

Round 3: 2-4 June - Lakeside Queensland (Enduro)

Round 4: 1-2 July - Sydney Motorsport Park (Enduro)

Round 5: 12-13 August - Wakefield Park (Enduro)

Round 6: 16-17 September - Sydney Motorsport Park (3 sprint races)

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

Todd Gilliland Sweeps K&N Pro Series Twin 100s at Irwindale Speedway

NASCAR, K&N Pro Series, Bill McAnally Racing, Todd Gilliland, Irwindale Speedway

Todd Gilliland won the pole and both NASCAR K&N Pro Series West races at Irwindale Speedway

Todd Gilliland had 10,000 reasons to celebrate at Irwindale Speedway in California.

Make that 10,002.

Gilliland won both NASCAR K&N Pro Series West races of the NAPA Auto Parts Twin 100 feature and a $10,000 bonus. He finished in the top three of the first four K&N Pro Series West races, winning three, earning him the $10,000 bonus.

“What a great car by everyone at Bill McAnally Racing, both races,” Gilliland said. “We actually made it better for the second race. That rarely happens. I’m very proud of everyone, hopefully this builds some momentum for the rest of the season.”

Gilliland won the pole for both races. He led for 82 laps in the first race, taking the lead for good from Bill McAnally Racing teammate Chris Eggleston on lap 68.

Eggleston was second in the first race, followed by rookie Garret Archer. Nicole Behar, who started the race in 21st and last place, was fourth. Rookie Will Rodgers was fifth, posting his fourth top-five finish in four races.

NASCAR, K&N Pro Series, Bill McAnally Racing, Todd Gilliland, Irwindale Speedway

Todd Gilliland has won three of the first four NASCAR K&N Pro Series West races in 2017

Gilliland led from pole to the checkered flag in the second race. He has won all four pole positions in the K&N Pro Series West races this year. It was his third win of the season. He won the K&N Pro Series West race at Kern County Raceway Park in California on March 23.

“That was an intense battle there with Chris Eggleston, my teammate,” Gilliland said. “We always have some fierce battles it seems like at the end of these races. That one was really good. There are lot of fans out here at Irwindale Speedway. I hope they all enjoyed it.”

Eggleston started on the front row with Gilliland and was second in the second race.

“Overall it was a good night,” Eggleston said. “Just came up a little short. It was fun racing with Todd on the last few restarts there. I just gave it everything we had, dove under him, hope the fans enjoyed it because those were some cool back and forth late swaps.”

Michael Self was third in the second race. It was his first top-five finish of the season.

“The first race definitely didn’t go how we wanted it to,” Self said. “We had a really good car through practice in the first race. Just couldn’t get track position at all, kept getting stuck on the bottom.”

NASCAR, K&N Pro Series, Bill McAnally Racing, Todd Gilliland, Irwindale Speedway

Todd Gilliland led all 100 laps of the second NASCAR K&N Pro Series West race at Irwindale Speedway

Self was sixth in the first race and said his team made some great changes to his car between the two races.

“Came back and the guys made some really good adjustments,” Self said. “In this race we were able to settle in, get single file a little bit. Just able to ride there in fourth waiting for a late restart, which is exactly what he had.”

Gilliland leads the K&N Pro Series West standings by seven points over Eggleston after the first four races. Rodgers, the top rookie in the K&N Pro Series West, is third in the West Series standings.

The next K&N Pro Series West race is the Toyota NAPA Auto Parts 150 at Spokane County Raceway in Washington.

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

K&N Team Driver, Team GenRight's - Jami Pellegrino on His 2nd King of the Hammers

Photo of Team GenRight's Jami Pellegrino in his driver's suit in front of his modified race

K&N team driver, Jami Pellegrino and his Team GenRight modified race RZR

The famed 2017 Nitto Tires King of the Hammers powered by OPTIMA Batteries was about as good as any of the past events. It is safe to say that the drivers, race teams, sponsors, and vendors are still getting event news and footage from the week, what with 5 insanely competitive events, well over 300 race teams and close to 40,000 spectators on hand. It’s a safe bet that this legendary off road event may have stories trickling in till mid summer by the looks of things.

Photo of Pellegrino who is all smiles as he stages for the big race.

K&N's Jami Pellegrino all smiles as he stages before the big race. Gotta love that confidence!

We caught up with one racer who is part of the Team GenRight trio of racers, K&N team driver and brand ambassador Jami Pellegrino. In fact, we had a chance to sit down with Jami prior to King of the Hammers to see what he and co-driver, Matt Lasher, had planned for their second Can-Am UTV Race presented by RCV.

Photo of Pellegrino and Lasher on the throttle hard through the short course at main pit

The K&N-sponsored team of Pellegrino and Lasher on it hard through the short course at main pit

While this may only be Pellegrino’s second King of the Hammer’s Can-Am UTV race, Jami is no stranger to the spectacle from literally every angle. And not just the UTV race. He has been the creative eye behind the lens on virtually all the print and video we’ve seen come from the GenRight Off Road crew. He’s been the one responsible for capturing the highlights of younger brother, Jordan Pellegrino’s chase for the win of the SmittyBilt Every Man Challenge and the emotion behind father, Tony Pellegrino’s quest to be crowned King of the Hammers in his incredible Team GenRight Ultra4 Unlimited Class car. Additionally he’s worked shooting for other iconic competitors like Jessi Combs, Tom Wayes, and Pro-Moto Racer Andrew Short, and many more. He’s filmed television commercials for nationally recognized brands that you’ve probably seen on ESPN. Pellegrino’s even provided a multitude of noteworthy clips that have been featured in multiple Hammerking Productions and his work has been used by countless other media outlets to help promote the competitors and these events. Could this be something that Jami can use to his advantage? We sure think so!

Photo of Pellegrino and Lasher as they ascend the brutal, boulder laden trail, Chocolate Thunder

Pellegrino and Lasher driving smooth through the brutal boulder laden trail of Chocolate Thunder

During his time behind the lens he has been able to look at the vehicles perhaps from a different perspective. Seeing what works and what doesn’t when the UTVs, EMC Stock Modifieds, and Ultra4s hit the brutal, boulder laden trails like Chocolate Thunder and Jackhammer. He’s witnessed as drivers have conquered the trails and witnessed as they or their equipment has failed or fallen short. He’s gained an immense amount of experience from behind the lens and learned invaluable lessons through watching as the races have unfolded before his very eyes. A sort of bird’s eye view that helped prepare him for his adventure trading the lens for the driver’s seat behind the wheel.

Photo of Pellegrino and Lasher as they head wide open through the desert prepping for the next trail

Wide open through the desert, Pellegrino and Lasher mentally prepare for the next big trail

Jamie shared that an avoidable, yet unfamiliar mechanical mishap that ended he and Lasher’s first KOH race early, just 15 miles short of the finish was something that he didn’t want to experience again. Even with the shortfall from the first race, Pellegrino learned that this race was definitely doable and that he had what it took to whip those trails into submission. Of course, provided he kept at it, getting more seat time, gaining more knowledge and experience with his vehicle. With all of that he believed he could make it happen. He pulled out all the stops to figuratively become one with his machine, learning everything he could, the ins, the outs, the nuances that would afford him and Lasher a solid finish. He tore down that UTV and developed suspension parts that in the end would prove to be one of the best choices he made, come race day. He put in countless miles of seat time in the rocks and the desert. Countless hours went into improvements on car #485. An abundant amount of research and development went into dialing in the RZR.

Photo of Jami and Matt coming down Backdoor in lap 1 getting ready to pass a fellow competitor

Hot on the tail of another UTV Class competitor, Jami & Matt make their move to pass

Qualifying was offered for the first time as an option for UTVs this year, and after seeing the brutal qualifying courses in years past, he and his co-driver decided to opt out for the sake of saving the car for race day. In hindsight he said, they probably could have run qualifying safely, considering the loop was mostly short course and scattered rocks. Nonetheless, they ended up drawing a starting position of 50th, 7 spots behind the last qualifier. This put the two off the line at about 8:21AM in a field of 75 cars.

Photo of Pellegrino and Lasher as they come down Backdoor toward the finish line.

Smooth and calculated as Pellegrino and Lasher head down Backdoor on their way to the finish line

As always, the first lap is mayhem, and to add to the mayhem this year, the first 10 miles of the course were literally a “make it or break it”, rough, tattered, rutted course. Their goal was to drive fast and smooth, and they did just that. No flats, no breaks, just passes. At the end of lap 1, all they had to do was refuel, and prepare themselves for the brutal rock trails that lap 2 held for them. After 20 more miles of desert, heading into Aftershock, the first rock trail of lap 2, this is where the fun began; cars were littered everywhere, winches, stacking rocks, you name it. Jami and Matt just drove smooth and worked their way through, passing several cars along the way through Aftershock, Mt. Fisher, Sledgehammer, Chocolate Thunder, Upper Big Johnson, Resolution, and down Backdoor. They just drove their race, never needing to winch, never having to change a single flat, never needing to replace a single belt. The team crossed the finish line at about 1:00 p.m. yielding them an elapsed time on course just over four and a half hours!

Photo of Pellegrino and Lasher as they cross the finish line in 13th position

K&N's Pellegrino and Lasher crossing the finish line at the bottom of Backdoor in 13th position

After starting 50th, the dynamic UTV Team of Jami Pellegrino and Matt Lasher passed 37 cars to finish a physical and overall 13th place. Happy with the finish marking their second Can-Am King of the Hammers UTV race presented by RCV Jami tells us that he can’t wait to continue to develop his skills as a driver, and continue to grow his relationships with all of the companies, like K&N Engineering that support him and the sport he loves.

Congratulations to K&N team driver, Jamie Pellegrino and his co-driver, Matt Lasher on their 13th overall finish on their second running of the Can-Am King of the Hammers UTV Race presented by RCV. We feel like the third time may be the charm for these two very talented competitors and can't wait to see what the 2017 race season holds for them.

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N

Yoshimura Suzuki Riders Elias and Hayden Excel in MotoAmerica Superbike Testing

Toni Elias at the Circuit of the Americas (COTA) testing

Toni Elias was the speedster of day one of the Dunlop tire testing at COTA (Photo: Brian J. Nelson)

If there was any doubt about how Roger Hayden and Toni Elias would adapt to the all new Suzuki GSX-R1000, those concerns were assuaged at the two-day Dunlop pre-season test at the Circuit of the Americas (COTA) in late March.

The stars of the K&N-sponsored Yoshimura Suzuki Superbike Team took turns posting blazing-fast times in the testing on the Austin, Texas, track. COTA will host round one of the MotoAmerica Superbike series.

On day one of testing, last year's COTA winner Elias topped his teammate Hayden by .556 in the final session. Elias claimed the overall best time, but the Spaniard was not totally satisfied with the feel of the front end on the new factory Suzuki.

“Today, I don't feel comfortable but I had the perfect lap,” Elias said. “The team worked hard and we improved, but I'm still missing some front information. With brakes, without brakes, it's the same feeling and we need to work on that."

Elias and Hayden with the new GSX-R100 at COTA testing

Elias (left) and Hayden show off the new GSX-R100 at COTA testing (Photo: Brian J. Nelson)

Hayden was happy with the work the team accomplished on day one of testing. However, the Yoshimura team veteran made it clear that bike set-up is a work in progress.

“It was nice to get a dry day in and get to learn more about the bike,” said Hayden. “We tried out a lot of things. Some were positive, some weren't, but we were pretty fast all day and that's good. We're always looking for a little more, but we were always toward the front every session and the bike, for me, is getting more comfortable.”

Hayden was the story of the circuit on the second day of testing. Not only did Hayden garner the fastest time of the day, but he did it with the fastest time a MotoAmerica Superbike has ever posted at COTA. That time of 2:08.305 on the 3.4-mile track edged out Elias’ second-day time of 2:08.432.

While both Elias and Hayden agree that there is much work to be done before the first race, the pre-season success of the Yosimura riders on the new Suzuki GSX-R1000 is very encouraging going into the 2017 campaign.

Day Two 2017 Dunlop Preseason MotoAmerica Superbike Test Results:

1. Roger Hayden (Suzuki) 2:08.305

2. Toni Elias (Suzuki) 2:08.432

3. Cameron Beaubier (Yamaha) 2:08.827

4. Josh Hayes (Yamaha) 2:09.696

5. Bobby Fong (Kawasaki) 2:09.745

6. Kyle Wyman (Yamaha) 2:10.521

7. Josh Herrin (Yamaha) 2:10.627

8. Mathew Scholtz (Yamaha) 2:10.977

9. Jake Gagne (Honda) 2:11.122

10. Cameron Petersen (Kawasaki) 2:11.506

clear

K&N PRODUCT SEARCH     WHERE TO BUY K&N